Printing the Chart for Color Adjustment with Fiery

This section describes the settings used for printing the chart for color adjustment using a Fiery DFE.

To print the chart for color adjustment with Fiery:

  1. Put the paper in the paper tray.
      Note:
    • The paper in the tray must match the type of the paper displayed for that chart on the Color Charts page. To display the Color Charts dialog, go to the Configuration page.
  2. Start Fiery Command WorkStation.
  3. Select the print job, then select Properties.
    The Job Properties dialog is displayed.
  4. In the left pane of the FieryJob Properties dialog, select MEDIA.
  5. Select Paper Catalog or manually select the Paper Type, Paper Weight, and Paper Size.
  6. In the left pane, select LAYOUT, and set Duplex to Off.
  7. In the left pane, select COLOR.
  8. Select the Output profile associated with the Fiery Calibration Name displayed for that color chart on the Paper Catalog page.
  9. Set CMYK source to Bypass conversion.
  10. Set Black text and graphics to Normal.
Parent topic: Adjusting Colors