Installing a Windows Operating System
RICOH ProcessDirector can be installed on these operating systems:
- Windows Server 2019 64-bit
- Windows Server 2022 64-bit
- Windows 10 Pro or Enterprise 64-bit
- Windows 11 Pro
To install a Windows operating system:
- See the Windows documentation to install the appropriate operating system. When you are asked to choose 32-bit or 64-bit mode, choose 64-bit mode for the Windows operating system. Make sure that User Account Control (UAC) is set to OFF when you install a RICOH ProcessDirector application server on a Windows operating system. You can turn it back on when the installation is complete.
- RICOH ProcessDirector supports both IPv4 and IPv6 protocols. If you use IPv4, IP addresses can be expressed
using dotted-decimal addresses or the fully qualified host name. If you use IPv6,
you must use the fully qualified host name of the server.
- Note:
- If you use an IPv6 address, you must complete additional configuration steps after you install RICOH ProcessDirector. See Configuring to use IPv6 addresses.
- In your firewall, open any ports that RICOH ProcessDirector uses. You must open this port:
- 15080 for inbound connections on the computer that RICOH ProcessDirector is installed on. Other computers use this port to connect to the RICOH ProcessDirector service.
Depending on your configuration, you might also need these ports:
Port numbers
Port number Used by 111 User Name Mapping and Server for Network File System (NFS) 515 LPD protocol 2049 Server for NFS Assigned by your system administrator Network Information Service (NIS) file sharing 5001–65535 IPDS printers Open only the ports that your printers use. They generally fall into this range.
5432 Default port for PostgreSQL database. You can choose to use a different port. Open this port only if you want to install the Reports feature using RICOH ProcessDirector Feature Manager. 6001 or alternative AFP Download Plus or Download for z/OS 6100 DownloadAFP input device This port is for the supplied input device. If you copy this input device, open additional ports as needed.
6102 DownloadLineData input device This port is for the supplied input device. If you copy this input device, open additional ports as needed.
6984–6992 Ricoh Transform features If you want to use the RICOH Transform Features , open these ports.
8010 Port used to send jobs with JDF/JMF job tickets to a printer that uses the EFI Fiery controller. 9100-9103 Port used to send jobs with Postscript job tickets to a printer that uses the EFI Fiery controller. 15080 RICOH ProcessDirector base product 15081 RICOH Printer Connector services for Custom PDF printers 15090 RICOH ProcessDirector Feature Manager 15443 RICOH ProcessDirector base product when SSL or TLS is enabled 15453 RICOH ProcessDirector Feature Manager when SSL or TLS is enabled 16080 Default port for the RICOH Transform Features user interface. If you choose to use a different port during the installation process, open that port instead. DB2 prior to 11.5.6: 50000 DB2 11.5.6 and higher: 25000
DB2 on a different computer These are the default ports used by DB2; the default value changed in Version 11.5.6. If your installation of DB2 uses a different port, open the port you use.
55555 Primary servers listening for secondary servers
The language that RICOH ProcessDirector runs in depends on the browser that you use to access it. To change the language, you have to change the language of the operating system.