InfoPrint Manager Transform Feature messages

This section lists the InfoPrint Manager Transform Feature messages.

EJZ00143E: The Transform Server {0} was not removed because the server is Starting or Stopping.

Explanation:
A Transform Server cannot be removed because this operation cannot be performed when the server is in a Starting or Stopping state.
System Action:
Processing continues.
User response:
To remove a Transform Server, wait until its state changes from Starting or Stopping.

EJZ00175E: The transform server {0} was not updated because you cannot change the Host Name and Port Number while the server is Ready or Transforming.

Explanation:
The Host Name and Port Number attributes cannot be changed when the transform server is in the Ready or Transforming state.
System Action:
Processing continues.
User response:
To change the Host Name or Port Number, you must stop the transform server, change the attributes, and then restart the transform server.

EJZ00176E: The transform server {0} was not updated because only the Host Name and Port Number can be changed while the server is Stopped or Lost Connection.

Explanation:
Any changes to attributes other than Host Name or Port Number result in an error when the transform server is in the Stopped or Lost Connection state because the new values must be passed to the transform server to be recognized. Only the Host Name and Port Number attributes can be changed when the transform server is in a Stopped or Lost Connection state.
System Action:
Processing continues.
User response:
To change any attributes except Host Name and Port Number, you must start the transform server, wait until it is in the Ready or Transforming state, and then make the modifications.

EJZ00177E: The transform server {0} was not updated because you cannot change any attributes while the server is Starting or Stopping.

Explanation:
When the transform server is in the Starting or Stopping state, it cannot accept any requests from Transform Feature to change attributes. Wait until the transform server is Stopped if you want to change the Host Name or Port Number, or wait until the transform server is in the Ready or Transforming state to change any of the other attributes.
System Action:
Processing continues.
User response:
To change the Host Name or Port Number, wait until the transform server is in the Stopped or Lost Connection state. To change any other attributes, wait until the transform server is in the Ready or Transforming state. You may need to start or stop the transform server for it to be in the required state.

EJZ00221E: Use the Browse button to select the resource you want to copy.

Explanation:
The user did not select a resource file or you entered the path directly instead of using the Browse button.
System Action:
None.
User response:
Use the Browse button to select the resource you want to copy.

EJZ00222E: Transform Feature did not copy the resource file

Explanation:
Transform Feature did not copy the resource file {0} as a {2} resource type for {3} because it could not be uploaded.
System Action:
None.
User response:
Make sure you use the Browse button to select the correct file and try again.

EJZ00223E: Transform Feature received the command to copy the resource file {0} as a {2} resource type for {3} to the following transform servers: list of servers

Explanation:
A resource file was sent to the coordinator to be copied to the list of selected transform servers.
System Action:
Processing continues.
User response:
None.

EJZ00224E: Transform Feature did not copy the resource file.

Explanation:
Transform Feature did not copy the resource file.
System Action:
Processing continues.
User response:
If the transform server is not in Lost Connection state, update the version of transform server to 1.2.5 or later.

EJZ00225E: Transform Feature did not copy the resource file.

Explanation:
Transform Feature did not copy the resource file.
System Action:
None.
User response:
Restart Transform Feature on the transform server that reported the error by using the Restart Transform Feature button or by rebooting the machine. When the transform server is available again, reissue the request.

EJZ00226E: Transform Feature did not copy the resource file.

Explanation:
Transform Feature did not copy the resource file.
System Action:
The shell script did not process a write command (mkdir, cp) on a resource directory. This situation applies both to the local computer or a compute node from a blade configuration.
User response:
If this is a valid request, update the permissions for the target resources directory with these commands:
  • chown –R ipsitm:itm /opt/infoprint/itm/xforms
  • chmod –R u+rwx /opt/infoprint/itm/xforms

EJZ00227E: Transform Feature did not copy the resource file.

Explanation:
Transform Feature did not copy the resource file.
System Action:
The user specified that the uploaded file is an archive but the shell script could not unpack it.
User response:
If the file is an archive, make sure it is created with the resource packaging tools included with Transform Feature or with a supported archiving tool, such as pkzip, zip, tgz, or gzip. Otherwise, change the archive setting of the file and resubmit the job.

EJZ00228E: Transform Feature did not copy the resource file {0} as a {2} resource type for {3} on the Transform Server {1} because some files were already present.

Explanation:
Transform Feature did not copy the resource file.
System Action:
None.
User response:
If you still want to distribute the resources, choose a different value for the Existing Files field.

EJZ00229E: Transform Feature did not copy the resource file {0} as a {2} resource type for {3} on the Transform Server {1} because an internal error occurred.

Explanation:
A usage, configuration, or unexpected type of error occurred while copying the resource. More information might be stored in the log files.
System Action:
None.
User response:
Try resubmitting the job, and if this error appears again, save the traces for that transform server using the Export Traces button. Contact Ricoh Production Print Solutions customer service.

EJZ00230I: Transform Feature successfully copied the resource file {0} as a {2} resource type for {3} on the Transform Server {1}.

Explanation:
The resource copy process was successful on the specified transform server.
System Action:
Processing continues.
User response:
None.

EJZ00231W: Transform Feature successfully copied the resources file {0} as a {2} resource type for {3} on the Transform Server {1}, but some files were skipped.

Explanation:
Some files were already found in one of the target directories, and the user specified that the distribution should skip the files that already exist.
System Action:
Processing continues. Existing files are skipped.
User response:
None.

EJZ00232W: Transform Feature successfully copied the resources file {0} as a {2} resource type for {3} on the Transform Server {1}, but some files were overwritten.

Explanation:
Some files were already found in one of the target directories, and the user specified that the distribution should overwrite the files that already exist.
System Action:
Processing continues. Existing files are overwritten.
User response:
None.

EJZ00233E: Transform Feature did not copy the resource file {0} as a {2} resource type for {3} on the Transform Server {1} because the Transform Server does not support the selected transform or resource type.

Explanation:
This error can be caused by a transform shipped as a PRPQ that is installed on the local transform server, but that is not on the transform server reporting the error.
System Action:
None.
User response:
When the transform that you are copying resources for is shipped as a PRPQ, make sure that the transform is installed on the transform server that reported the error. You should also make sure that the transform server that reported the error is not an older version than the local transform server.

EJZ00246E: Transform Feature could not recognize the hostname {0} on this network while trying to unregister with the print server {1}.

Explanation:
Transform Feature did not find the print server's host name when trying to unregister with it.
System Action:
The print server was deleted from the Transform Feature list.
User response:
None.

EJZ00247E: Transform Feature encountered a communication error while trying to unregister with the print server {0}.

Explanation:
Transform Feature found a communication problem when trying to unregister with the specified print server.
System Action:
The print server was deleted from the Transform Feature list.
User response:
None.

EJZ00248E: Transform Feature failed to unregister with the print server at address {0} and port {1} because the print server initialization failed with the following message: {2}-

Explanation:
The specified print server returned an error when Transform Feature tried to unregister from it.
System Action:
None.
User response:
Fix the problem indicated in the error message and try to unregister the print server again.

EJZ00249W: Transform Feature successfully removed the print server {0}, but the print server is still registered with Transform Feature.

Explanation:
Transform Feature detected that at some time the print server was associated with this Transform Feature and the unregistration process could not be completed.
System Action:
Future jobs may still be sent to Transform Feature.
User response:
Add the printer server and then remove it. If you see an initialization error message when adding the print server, fix the indicated problem.

EJZ00250E: Transform Feature received the command to reconnect to these print servers: list of print servers.

Explanation:
The user issued the command to reconnect to list of print servers.
System Action:
Transform Feature reconnects the list of print servers.
User response:
None.

EJZ00251E: Transform Feature could not reconnect to the print server {0} because it is no longer associated with Transform Feature.

Explanation:
Transform Feature could not find the specified print server in the list of print servers because it has been removed, and the main page has not refreshed yet.
System Action:
None.
User response:
None.

EJZ00252E: Transform Feature could not reconnect to the print server at the host name {0}.

Explanation:
This host name is not recognized on this network. This could be caused by a network communication error.
System Action:
Transform Feature could not find the specified hostname on the network.
User response:
Make sure that the hostname is recognized on the network and resubmit the command. If the hostname is incorrect, remove the print server and add it again with the correct host name.

EJZ00253E: Transform Feature encountered a communication error with the print server {0} when trying to reconnect to it.

Explanation:
Transform Feature could not connect to the specified print server.
System Action:
None.
User response:
Contact your network administrator to resolve connectivity issues.

EJZ00254E: Transform Feature could not reconnect to the print server at address {0} and port {1} because the print server initialization failed with the following message: {2}

Explanation:
The specified print server returned an error when Transform Feature tried to register with it.
System Action:
None.
User response:
Fix the problem indicated in the error message and try to reconnect again.

EJZ00255I: Transform Feature successfully reconnected to the print server {0}.

Explanation:
The specified print server reconnected to Transform Feature.
System Action:
Transform Feature completed the registration process for the specified print server.
User response:
None.

EJZ00256W: Transform Feature did not attempt to reconnect to the print server {0} because this operation is not supported for this type of printer.

Explanation:
You cannot use this type of printer with Transform Feature.
System Action:
None.
User response:
None.

EJZ00257W: Transform Feature failed to reconnect to the print server {0} that was registered with Transform Feature.

Explanation:
Transform Feature could not reconnect to the specified print server, but Transform Feature was registered with the print server some time in the past. Therefore, future jobs might still be sent to Transform Feature.
System Action:
None.
User response:
None.

FUY04001: Failed opening connection. Host: <IP address or host name> Port: <port number>.

Explanation:
An error occurred when the print server tried to open the connection with Transform Feature. The connection was not opened.
System Action:
Processing stops.
User response:
Make sure that you specified the IP address or host name and port number of Transform Feature correctly. Validate that the print server can have bidirectional communication with Transform Feature using ports 6984 and 6986. For more information, see the documentation for InfoPrint Manager.

FUY04002: Failed opening connection. Socket number: <socket number>.

Explanation:
An error occurred when the print server tried to open the connection with Transform Feature. The connection was not opened.
System Action:
Processing stops.
User response:
Verify that the socket number number for Transform Feature is correct in the print server configuration.

FUY04003: Error sending data.

Explanation:
The Print server interface reported an error when trying to send data to Transform Feature.
System Action:
Processing stops.
User response:
Verify that a connection to Transform Feature is still available and resubmit the data.

FUY04004: Error generated by Transform Feature.

Explanation:
The Print server interface received a message from Transform Feature that states that an error has occurred.
System Action:
Processing stops.
User response:
Verify that Transform Feature is running correctly. Resubmit the request.

FUY04005: Transform not supported: <transform ID>.

Explanation:
The Print server interface requested a transform ID that is not supported by Transform Feature.
System Action:
Processing stops.
User response:
Resubmit with a valid transform ID, as shown in Transform IDs.

FUY04006: Key not supported by Transform Feature: <name of key>.

Explanation:
The Print server interface sent a key that is not supported by Transform Feature.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04007: Input data type not recognized by sniffer.

Explanation:
Transform Feature found an error when running the sniffer. The data type was not recognized by the sniffer.
System Action:
Processing stops.
User response:
Determine if the data type is valid, and if not, adjust the request as appropriate.

FUY04008: Output file <file name> does not exist or cannot be accessed.

Explanation:
Transform Feature found an error when trying to open or create the output file file name. This error can occur because Transform Feature could not create the output file, the output file does not exist, the permissions are incorrect, or the path is specified incorrectly.
System Action:
Processing stops.
User response:
Verify that the output file is accessible and resubmit the job.

FUY04009: Input file <file name> does not exist or cannot be accessed.

Explanation:
Transform Feature found an error when trying to open the input file file name. This error can occur because the file does not exist, the permissions are incorrect, or the path is specified incorrectly.
System Action:
Processing stops.
User response:
Verify that the output file is accessible and resubmit the job.

FUY04010: Resource <resource name> does not exist or cannot be accessed.

Explanation:
Transform Feature found an error when trying to open a resource resource name. This error can occur because the resource does not exist, the permissions are incorrect, or the path is specified incorrectly.
System Action:
Processing stops.
User response:
Verify that the resource is accessible. Correct any errors before resubmitting the job.

FUY04011: An invalid <key/value> pair was provided to the Print server interface.

Explanation:
The print server interface received an invalid key/value pair.
System Action:
Processing stops.
User response:
Verify that the parameters are correct and resubmit. Contact Software Support for the print server you are using.

FUY04012: The Print server interface encountered a syntax error.

Explanation:
The Print server interface found a syntax problem. It can be a missing argument, handler, or key.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04013: The Print server interface encountered a logic error.

Explanation:
The Print server interface found a program error. Possibilities are: multiple transforms for a single instance, multiple tasks for a single instance, or task state mismatch.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04014: The Print server interface encountered a trace error.

Explanation:
The print server interface found a tracing problem. It had a problem using the trace handler.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04015: The Print server interface encountered a message catalog error.

Explanation:
The Print server interface could not open a message catalog or request a message from the message catalog.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04016: The Print server interface encountered a failure.

Explanation:
The Print server interface failed.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04017: Flag <flag name> is followed by an invalid value.

Explanation:
Transform Feature found a flag that has an invalid value or missing value.
System Action:
Processing stops.
User response:
Verify that the value specified with the flag name is valid and resubmit the job.

FUY04018: The Print server interface encountered an internal error.

Explanation:
The Print server interface found an error while using the communication protocol.
System Action:
Processing stops.
User response:
Contact Software Support.

FUY04019: Error receiving data.

Explanation:
The Print server interface reported an error when trying to receive data from Transform Feature.
System Action:
Processing stops.
User response:
Verify that a connection to Transform Feature is still available.

FUY04020: Job failed in Transform Feature with job error: <job error>.

Explanation:
Transform Feature reported that the job has failed. In the message text, job error is a numeric code that can help Software Support diagnose the problem. When job error is 100, an optional transform, such as afp2pdf, is not installed.
System Action:
Processing stops.
User response:
Determine what job error occurred and resubmit the job. To determine what error occurred, look at the associated transform messages, if any. The transform messages might be printed on a separate page at the end of the output or in the print server's message log. If you need assistance, contact Software Support and provide the numeric code in the message.

When job error is 100, determine which transform is not installed, install the optional transform, and resubmit the job.

FUY04021: Transform Feature has processed <number of pages> pages.

Explanation:
Transform Feature has sent a status update of the number of pages that have been processed.
System Action:
Processing continues.
User response:
None.

FUY04022: Missing a required argument or flag.

Explanation:
Transform Feature driver was called with a missing required flag.
System Action:
Processing stops.
User response:
Verify that the command contains all required flags. When using a control/configuration file, verify that the combination of command line flags and arguments in the control/configuration file contains all required arguments or flags.

FUY04023: Invalid flag: <flag>.

Explanation:
Transform Feature driver was executed with an invalid flag.
System Action:
Processing continues.
User response:
Remove the invalid flag and resubmit the request.

FUY04024: Error opening control/configuration file: <filename>.

Explanation:
Transform Feature driver was executed with the -C flag, but an invalid configuration file was provided.
System Action:
Processing continues.
User response:
Verify and correct the configuration/control file, and resubmit the request.

FUY04025: Error opening control/configuration file: <filename>.

Explanation:
Transform Feature driver could not read the control/configuration file. This error can be caused by file reading procedures or an incorrectly built control/configuration file.
System Action:
Processing stops.
User response:
Verify that the control/configuration file is valid and resubmit the request.

FUY04026: Attribute <attribute name> doesn't have a value.

Explanation:
Transform Feature driver read an attribute from the control/configuration file, but the argument had no value.
System Action:
Processing stops.
User response:
Modify the configuration/control file and provide the corresponding value for the attribute.

FUY04027: Attribute <attribute name> is not supported.

Explanation:
Transform Feature driver read an invalid attribute from the control/configuration file.
System Action:
Processing stops.
User response:
Remove the invalid attribute from the control/configuration file.

FUY04028: Error parsing Transforms options and values.

Explanation:
Transform Feature driver could not parse the options and values of the Transform, known as the Transform flags that are sent to Transform Feature server.
System Action:
Processing stops.
User response:
Verify that the -F flag or the trans_flags argument contains a correct list of Transform options and values.

FUY04029: Error reading command line flags and values.

Explanation:
Transform Feature driver could not read the command line flags and values.
System Action:
Processing stops.
User response:
Verify that the command line flags are correct and resubmit the request.

FUY05251: The %s feature is not installed.

Explanation:
The required feature is not installed.
System Action:
Job will not be processed.
User response:
Make sure that the required feature is correctly installed, then try submitting the job again.

FUY05252: The %s license key was not found or is invalid.

Explanation:
The required key was not found, or there was a problem while collecting data about it.
System Action:
The job will fail to process.
User response:
Make sure the computer license keys file is in the correct location and has the required access rights. If any changes are made, please restart the ITM server; otherwise, collect trace information and send to Ricoh Production Print Solutions for diagnosis.

FUY05253: The %s demo license will expire in %d days(s).

Explanation:
The specified demo license will expire after the indicated number of days. This is an informative warning message.
System Action:
The job will process normally.
User response:
Renew the license and update the license keys file before the license expires.

FUY05254: The %s demo license has expired.

Explanation:
The specified demo license has expired.
System Action:
The job will fail to process.
User response:
Contact Ricoh Production Print Solutions to obtain a valid license and update the license keys file to continue using this transform.

FUY05255: The %s maintenance license will expire in %d day(s).

Explanation:
The specified maintenance license will expire after the indicated number of days. After that period, you will not be able to receive new updates for this transform.
System Action:
The job will process normally.
User response:
Renew the license and update the license keys file before the license expires.

FUY05256: The %s maintenance license has expired.

Explanation:
The specified license has expired. You will not be able to receive new updates for this transform.
System Action:
The job will process normally.
User response:
Renew the license and update the license keys file to continue using this transform.

Related information:

Troubleshooting with InfoPrint Manager
Parent topic: Reference information for InfoPrint Manager Transform Feature