デーモン構成ファイル

PCL、PostScript、および PDF のすべての変換で、その変換を使用する前にデーモンを実行しておく必要があります。pcl2afpdデーモンは、pcl2afp変換のPostScriptインタープリター部分を管理するために少なくとも3つのデーモンが実行していることが必要です。ps2afpdデーモンは、ps2afppdf2afpの変換のPostScriptまたはPDF CPSIインタープリター部分を管理します。appedデーモンは、ps2afppdf2afpの変換のPDF APPE処理部分を管理します。agspdld デーモンは、ps2afppdf2afp の変換の PDF および PostScript Artifex GhostPDL (AGSPDL) 処理部分を管理します。このデーモンについては、RICOH InfoPrint Manager:Referenceを参照してください。

各デーモンは、対応する変換と同様に、構成ファイルを使用します。デーモン構成ファイルは、変換構成ファイルと同じキーワード(serverは除く)、デーモンの操作を制御する一部のキーワードを持つことができます。デーモンのキーワードについては、RICOH InfoPrint Manager:Referenceを参照してください。

サンプルAGSPDLデーモン構成ファイル (agspdld.cfg)

# agspdld configuration file

######################################################################
# KEYWORD                                                      PURPOSE
######################################################################

port = 8254              #                    which TCP/IP port to use

work_directory = <AFP Support Path>\agspdl
                         #            directory to put work files into
log_file = <AFP Support Path>\agspdl\agspdl.log
                         #                 where to write log messages
log_size = 1024          #                      maximum log size in KB

ps_font_directory = <AFP Support Path>\agspdl\Resource
                         #                      list of resource files
                         
ps_output_type = IO1_G4  #               type of AFP image to generate
ps_width = 8.5i          #                    width of generated image
ps_length = 11i          #                   length of generated image
ps_resolution = 300      #                resolution of target printer
agspdl_is = 1            #                  the is afp compliance flag
#agspdl_compress_type = lzw
                         #                             lzw compression
                         #               other options: jpeg, jpeg-sub
#agspdl_page_size_control
                         # -psc              page size control options
                         #          ArtBox, BleedBox, CropBox, TrimBox

サンプルAPPEデーモン構成ファイル (apped.cfg)

# apped configuration file

######################################################################
# KEYWORD                                                      PURPOSE
######################################################################

port = 8250                    #              which TCP/IP port to use

appe_work_directory = <AFP Support Path>\appe
                               # directory to put APPE work files into

log_file = <AFP Support Path>\appe\apped.log
                               #    where to write daemon log messages
log_size = 100                 #                maximum log size in KB

#transform_trace_file = <AFP Support Path>\appe\appeTraceFile.log
                               #  where to write APPE transform traces
                               #        comment out to disable tracing

#transform_trace_size = 200    #              maximum trace size in KB
                               #  use 0 to disable trace size checking

#transform_trace_level = MDFL@-1
               #                                     APPE traces level
               # MMST@-1                  output most trace statements
               # MINT@-1          output intermediate level of tracing
               # MDFL@-1               output default trace statements

#appe_fonts_path = 
               #list of directories where extra APPE fonts are located

appe_font_map_files = <Install Path>\appe\fontmaps\FontMapSample.cfg

appe_width = 8.5i              #              width of generated image
appe_length = 11i              #             length of generated image
appe_x_offset = 0i             #                left and right margins
appe_y_offset = 0i             #                top and bottom margins
appe_resolution = 300          #          resolution of target printer
appe_output_type = IO1_G4      #         type of AFP image to generate
#appe_is = 1                   #            the is afp compliance flag
#appe_compress_type = jpeg-sub 
               # JPEG subsampled compression. Other options: jpeg, lzw
#appe_pagetype = DOCUMENT       
               # type of afp structured field for each individual page

サンプルpcl2afpデーモン構成ファイル (pcl2afpd.cfg)

# pcl2afpd configuration file

######################################################################
# KEYWORD                                                      PURPOSE
######################################################################

port = 8253                 #                 which TCP/IP port to use

work_directory = <AFP Support Path>\pcl2afp
                            #         directory to put work files into
log_file = <AFP Support Path>\pcl2afp\pcl2afpd.log
                            #              where to write log messages
log_size = 100              #                   maximum log size in KB

pcl_program = <Install Path>\bin\pcl6.exe
                            #          name of PCL interpreter program
pcl_fonts_path = <Install Path>\pcl2afp
                            #          location of .FCO files for PCL6
pcl_max_memory = 12000K     #            maximum amount of memory that
                            #             PCL uses; the 'K' is ignored

pcl_job_timeout = 20        #                maximum number of minutes
                            #                     to process a PCL job

pcl_width = 8.5i            #                 width of generated image
pcl_length = 11i            #                length of generated image
pcl_x_offset = 0i 	    #                   left and right margins
pcl_y_offset = 0i           #                   top and bottom margins
pcl_resolution = 300        #             resolution of target printer
pcl_output_type = IO1_G4    #            type of AFP image to generate

#pcl_is = 1                 #               the is afp compliance flag
#pcl_compress_type = lzw    #                          lzw compression
                            #            other options: jpeg, jpeg-sub

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.

######################################################################

# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and 
# double-sided (duplexed) output, uncomment the following line.

# device_controls = plex

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper 
# tray to use, uncomment the line below and fill in the correct values:

# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the PCL bin number (between 1 and 59).

# You can list up to 20 mappings.

# device_controls = plex,inputX=(pcl_bin=Z),inputX=(pcl_bin=Z)

InfoPrint 4000とInfoPrint 4100プリンター向けサンプルps2afpデーモン構成ファイル (ps2afpd.cfg)

# ps2afpd configuration file

######################################################################
# KEYWORD                                                      PURPOSE
######################################################################

port = 8251              #                    which TCP/IP port to use

work_directory = <AFP Support Path>\ps2afp
                         #            directory to put work files into
log_file = <AFP Support Path>\ps2afp\ps2afpd.log
                         #                 where to write log messages
log_size = 100           #                      maximum log size in KB

ps_program = <Install Path>\cpsibin\ps2afpi.exe
                         #      name of PostScript interpreter program
ps_init_file = <Install Path>\ps\ps2afp.ps
                         #              name of PostScript interpreter
                         #                         initialization file
ps_files_path = <Install Path>\ps;\
        <Install Path>\config;\
        <Install Path>\reslib
                         #            path to search for jobInit files

ps_max_memory = 48000K   #               maximum amount of memory that
                         #         PostScript uses; the 'K' is ignored

ps_job_timeout = 9999    #                   maximum number of minutes
                         #                   to process PostScript job
ps_server_timeout = 360  #                   maximum number of minutes
                         #                   server waits between jobs

ps_font_map_files = <Install Path>\ps\fonts.map
                         #                  list of font mapping files

ps_width = 8.5i          #                    width of generated image
ps_length = 11i          #                   length of generated image
ps_x_offset = 0i         #                      left and right margins
ps_y_offset = 0i         #                      top and bottom margins
ps_resolution = 300      #                resolution of target printer
ps_output_type = IO1_G4  #               type of AFP image to generate
#following three parameters will apply only if threshsmall specified
ps_imgsmall = 0.5i       #                  default value for imgsmall
ps_linesmall = 0.5i      #                 default value for linesmall
ps_txtsmall = 0.5i       #                  default value for txtsmall
#ps_is = 1                #                  the is afp compliance flag
ps_compress_type = jpeg-sub  # JPEG subsampled compression. \
Other options: jpeg, lzw

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.

######################################################################

# ENABLING THE FINISHING FLAG ONLY
# If you want your users to be able to allow finishing operations,
# such as staple operations or punch operations, uncomment the  
# following line.

# device_controls = finishing

######################################################################

# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and 
# double-sided (duplexed) output, uncomment the following line.

# device_controls = plex

######################################################################

# ENABLING BOTH PLEX AND FINISHING
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND allow finishing 
# operations, such as staple operations or punch operations, 
# uncomment the following line.

# device_controls = plex,finishing

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper 
# tray to use, uncomment the line below and fill in the correct values:

# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)

# device_controls = plex,inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output, AND allow finishing
# operations, AND specify which paper tray to use, uncomment the line 
# below and fill in the correct values:

# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)

# device_controls = plex,finishing,inputX=(size,type=ZZZ,weight=ZZZ, \
color=ZZZ), inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)

カットシートIPDSプリンター向けサンプルps2afpデーモン構成ファイル (3160d.cfg)

# ps2afpd configuration file

######################################################################
# KEYWORD                                                      PURPOSE
######################################################################

port = 8252              #                    which TCP/IP port to use

work_directory = <AFP Support Path>\ps2afp2
                         #            directory to put work files into
log_file = <AFP Support Path>\ps2afp2\ps2afpd.log
                         #                 where to write log messages
log_size = 100           #                      maximum log size in KB

ps_program = <Install Path>\cpsibin\ps2afpi.exe
                         #      name of PostScript interpreter program
ps_init_file = <Install Path>\ps\ps2afp.ps
                         #              name of PostScript interpreter
                         #                         initialization file
ps_files_path = <Install Path>\ps;\
                <Install Path>\config;\
                <Install Path>\reslib
                         #            path to search for jobInit files

ps_max_memory = 48000K   #               maximum amount of memory that
                         #         PostScript uses; the 'K' is ignored

ps_job_timeout = 9999    #                   maximum number of minutes
                         #                   to process PostScript job
ps_server_timeout = 360  #                   maximum number of minutes
                         #                   server waits between jobs

ps_font_map_files = <Install Path>\ps\fonts.map
                         #                  list of font mapping files

ps_width = 8.5i          #                    width of generated image
ps_length = 11i          #                   length of generated image
ps_x_offset = 0i         #                      left and right margins
ps_y_offset = 0i         #                      top and bottom margins
ps_resolution = 300      #                resolution of target printer
ps_output_type = IO1_G4  #               type of AFP image to generate
ps_compress_type = jpeg-sub  # JPEG subsampled compression. \
Other options: jpeg, lzw

pragma = jobInit 3160.ibm85lpi.tf.dt.ps; \
            jobInit 3160.ibm85lpi.ta.ps; \
                          wglRotate yes;

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.

######################################################################

# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and 
# double-sided (duplexed) output, uncomment the following line.

# device_controls = plex

######################################################################

# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper 
# tray to use, uncomment the line below and fill in the correct values:

# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)

# device_controls = plex,inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)