Planning for a LAN connection
First, connect your Windows systems to your local area network (LAN). You can perform this task when you install Windows or after you finish the installation. In either case, you might find it useful to complete this worksheet ahead of time for each system that is new to your LAN.
LAN TCP/IP configuration worksheet
| Control Panel Prompt | Description | Value |
|---|---|---|
| Computer Name | The (NetBIOS) name of this computer on the Windows network. | |
| Domain/Workgroup | The group of Windows computers that this computer belongs to. | |
| Adapter | The physical card used to connect this system to the network. An appropriate driver for this card might need to be added. | |
| Obtain IP address from DHCP server? | The Dynamic Host Configuration Protocol (DHCP) provides a new IP address for this system each time it is restarted. If DHCP is not in use, a static IP address must be assigned. | __ yes __ no
Note: It is strongly recommended that you specify no for DHCP.
|
| IP Address | An IPv4 address (for example, 9.99.178.17) statically assigned to this system. Not needed if DHCP is in use. | |
| An IPv6 address is represented by eight groups of four hexadecimal digits, each group has 16 bits. The groups are separated by colons (:). An example of IPv6 address is: 2001:0ce8:58a3:0000:0000:6a2e:0370:3734. Depending where you use it, you can enclose the IPv6 address within square brackets, for example: [2001:0ce8:58a3:0000:0000:6a2e:0370:3734]. | ||
| Subnet Mask | A number (for example, 255.255.255.0) indicating which part of the IP address identifies the network and which part identifies the system. Not needed if DHCP is in use. | |
| Default Gateway | The system used by default to allow this network to communicate with other networks. Not needed if DHCP is in use. | |
| DNS Host Name | The (Internet) name of this system recognized by the Domain Name System (DNS). If possible, this name should be the same as the Windows computer name. | |
| DNS Domain | The Internet domain that this computer belongs to. | |
| DNS Service Search Order | An ordered list of IP addresses of DNS servers. These systems are queried to resolve Internet names into IP addresses. | |
| Domain Suffix Search Order | An ordered list of TCP/IP domains to search for a given host name. | |
| Primary WINS Server | The first Windows Internet Name Service (WINS) system to query to resolve a Windows (NetBIOS) system name into an IP address. | |
| Secondary WINS Server | The second WINS system to query. | |
| Enable DNS for Windows Resolution? | DNS can be used to resolve Windows (NetBIOS) names into IP addresses. | __ yes __ no |
| Enable LMHOSTS Lookup? | LMHOSTS files statically associate Windows system names to IP addresses. | __ yes __ no |
| Scope ID | The set of IP addresses assignable for a Windows domain is a called a scope. | |
| Enable IP Forwarding? | IP Forwarding allows data to be forwarded on a multi-homed system. | __ yes __ no |