クライアント構成ファイル
サンプルPostScriptまたはPDF構成ファイル (ps2afp.cfg)は、PostScriptとPDF変換用の構成ファイルを示しています。PCL変換用の構成ファイルも同様ですが、pcl_server_timeoutキーワードはありません。その結果、PCL 変換では、「変換オプションの階層」に説明した pcl2afp コマンドの場合、コマンド行からの -s フラグをサポートしません。
サンプルPostScriptまたはPDF構成ファイル (ps2afp.cfg)
# ps2afp configuration file
######################################################################
# CPSI, APPE and AGSPDL GENERAL SETTINGS
# KEYWORD EQUIVALENT ps2afp FLAG PURPOSE
######################################################################
port = 8251 # -P which TCP/IP port to use
appe_port = 8250 # -P which TCP/IP port to use for appe
agspdl_port = 8254 # -P which TCP/IP port to use for agspdl
server = localhost # -S which server to connect with
ps_max_memory = 48000K # -M maximum amount of memory that
# PostScript uses; the 'K' is ignored
ps_job_timeout = 9999 # -j maximum number of minutes
# to process PostScript job
ps_server_timeout = 360 # -s maximum number of minutes
# server waits between jobs
ps_document_processor = cpsi # -psproc which ps document
# processor to use
pdf_document_processor = cpsi # -pdfproc which pdf document
# processor to use
######################################################################
# CPSI SPECIFIC SETTINGS
# KEYWORD EQUIVALENT ps2afp FLAG PURPOSE
######################################################################
ps_width = 8.5i # -w width of generated image
ps_length = 11i # -l length of generated image
ps_x_offset = 0i # -x left and right margins
ps_y_offset = 0i # -y top and bottom margins
ps_resolution = 300 # -r resolution of target printer
ps_output_type = IO1_G4 # -a type of AFP image to generate
ps_imgsmall = 0.5i # default value for imgsmall
ps_linesmall = 0.5i # default value for linesmall
ps_txtsmall = 0.5i # default value for txtsmall
#ps_is = 1 # the is afp compliance flag
#ps_compress_type = jpeg-sub # JPEG subsampled compression. \
Other options: jpeg, lzw
#appe_pagetpye = DOCUMENT # type of afp structured field \
for each individual page
######################################################################
# APPE SPECIFIC SETTINGS
# KEYWORD EQUIVALENT ps2afp FLAG PURPOSE
######################################################################
appe_width = 8.5i # -w width of generated image
appe_length = 11i # -l length of generated image
appe_x_offset = 0i # -x left and right margins
appe_y_offset = 0i # -y top and bottom margins
appe_resolution = 300 # -r resolution of target printer
appe_output_type = IO1_G4 # -a type of AFP image to generate
#appe_is = 1 # the is afp compliance flag
#appe_compress_type = jpeg-sub # JPEG subsampled compression. \
Other options: jpeg, lzw
#appe_pagetpye = DOCUMENT # type of afp structured field \
for each individual page
######################################################################
# AGSPDL SPECIFIC SETTINGS
# KEYWORD EQUIVALENT ps2afp FLAG PURPOSE
######################################################################
agspdl_output_type = IO1_G4 # -a type of AFP image to generate
agspdl_resolution = 300 # -r resolution of target printer
agspdl_width = 8.5i # -w width of generated image
agspdl_length = 11i # -l length of generated image
agspdl_is = 1 # the is afp compliance flag
######################################################################
# APPE and CPSI
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.
######################################################################
# APPE and CPSI
# ENABLING THE FINISHING FLAG ONLY
# If you want your users to be able to allow finishing operations,
# such as staple operations or punch operations, uncomment the
# following line.
# device_controls = finishing
######################################################################
# APPE and CPSI
# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and
# double-sided (duplexed) output, uncomment the following line.
# device_controls = plex
######################################################################
# APPE and CPSI
# ENABLING BOTH PLEX AND FINISHING
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND allow finishing
# operations, such as staple operations or punch operations,
# uncomment the following line.
# device_controls = plex,finishing
######################################################################
# APPE and CPSI
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper
# tray to use, uncomment the line below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)
# device_controls = plex,inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)
######################################################################
# APPE and CPSI
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output, AND allow finishing
# operations, AND specify which paper tray to use, uncomment the line
# below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)
# device_controls = plex,finishing, \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)
サンプルpcl2afpクライアント構成ファイル (pcl2afp.cfg)
# pcl2afp configuration file
# KEYWORD EQUIVALENT pcl2afp FLAG PURPOSE
######################################################################
port = 8253 # -P which TCP/IP port to use
server = localhost # -S which server to connect with
pcl_max_memory = 6000K # -M maximum amount of memory that
# PCL uses; the 'K' is ignored
pcl_job_timeout = 20 # -j maximum number of minutes
# to process a PCL job
pcl_width = 8.5i # -w width of generated image
pcl_length = 11i # -l length of generated image
pcl_x_offset = 0i # -x left and right margins
pcl_y_offset = 0i # -y top and bottom margins
pcl_resolution = 300 # -r resolution of target printer
pcl_output_type = IO1_G4 # -a type of AFP image to generate
#pcl_is = 1 # the is afp compliance flag
#
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.
######################################################################
# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and
# double-sided (duplexed) output, uncomment the following line.
# device_controls = plex
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper
# tray to use, uncomment the line below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the PCL bin number (between 1 and 59).
# You can list up to 20 mappings.
# device_controls = plex,inputX=(pcl_bin=Z),inputX=(pcl_bin=Z)
構成ファイルは、変換フラグと同じキーワードを使用します。構成ファイルに指定できるキーワードと値については、RICOH InfoPrint Manager：リファレンスを参照してください。