Installing a Windows Operating System
When you install an application server on a Windows operating system, choose the correct
mode to run in and open the correct ports in the firewall.
RICOH ProcessDirector can be installed on these operating systems:
- Windows Server 2019 64-bit
- Windows Server 2022 64-bit
- Windows 10 Pro or Enterprise 64-bit
- Windows 11 Pro
To install a Windows operating system:
- See the Windows documentation to install the appropriate operating system. When you
are asked to choose 32-bit or 64-bit mode, choose 64-bit mode for the Windows operating
system. RICOH ProcessDirector is not compatible with 32-bit mode.
Make sure that User Account Control (UAC) is set to OFF. You can turn it back on when the installation is complete.
- RICOH ProcessDirector supports both IPv4 and IPv6 protocols. If you use IPv4, IP addresses can be expressed
using dotted-decimal addresses or the fully qualified host name. If you use IPv6,
you must use the fully qualified host name of the server.
- Note:
- If you use an IPv6 address, you must complete additional configuration steps after you install RICOH ProcessDirector. See Configuring to use IPv6 addresses.
- Depending on your configuration, you might also need these ports:
Ports to open on the RICOH ProcessDirector primary server
Port Source system Description 15080 User workstation Access to the RICOH ProcessDirector user interface if not using TLS. 15090 Administrator workstation Access to the RICOH ProcessDirector Feature Manager interface if not using TLS. 15443 User workstation Access to the RICOH ProcessDirector user interface if using TLS. 15453 Administrator workstation Access to the RICOH ProcessDirector Feature Manager user interface if using TLS. 515 Customer application Required when sending jobs to RICOH ProcessDirector using LPR. 5001-65535 Customer mainframe Required when sending jobs to RICOH ProcessDirector using Download for z/OS or AFP Download Plus. The port numbers defined in RICOH ProcessDirector must match the port numbers defined as printers on the mainframe. 55555 RICOH ProcessDirector secondary server Required if you use secondary servers that are not defined on the same system as the primary server. Allows communication between the secondary server and the primary server. 15080 or 15443 RICOH TotalFlow Print server Used to send printing status to RICOH ProcessDirector. Ports to open on RICOH ProcessDirector primary and secondary server
Port Source system Description 15081 Administrator workstation Used to import the custom PDF printer definition to the RICOH ProcessDirector server that will be communicating with the printer Only necessary when using custom PDF printers. Most systems do not use custom PDF printers.
15081 Ricoh PDF printer The job ticket contains reference to a PDF file that the printer retrieves. Ports to open on the NFS server
Port Source system Description 111 RICOH ProcessDirector primary and secondary server Used by the NFS server and User Name Mapping function when sharing data from the primary server to secondary servers or other systems using NFS. 2049 RICOH ProcessDirector primary and secondary server Used by the NFS server when sharing data from the primary server to secondary servers or other systems using NFS. Ports to open on printers
Port Source system Description 161 RICOH ProcessDirector primary and secondary server Required when RICOH ProcessDirector gets printer status and information using SNMP. 8010 RICOH ProcessDirector primary and secondary server Required when RICOH ProcessDirector gets printer status and information using SNMP. 9100-9103 RICOH ProcessDirector primary and secondary server Required when sending jobs to a printer with a EFI Fiery controller using Postscript job tickets. Ports to open on LDAP server
Port Source system Description 389, 636, or other port as configured. RICOH ProcessDirector primary server Required when RICOH ProcessDirector is using LDAP to authenticate users. 1These printers are defined in RICOH ProcessDirector as Ricoh PDF Printer objects.Ports to open on printers that support JMF interfaces 1
Port Source system Description 80 RICOH ProcessDirector primary and secondary server Required when RICOH ProcessDirector sends IMSS queries using the HTTP protocol. 8010 RICOH ProcessDirector primary and secondary server Required when sending JMF files to EFI Fiery controllers. 9100 (default) - 9103 RICOH ProcessDirector primary and secondary server Required when sending jobs to a printer with a EFI Fiery controller using Postscript job tickets. 9100 is the default port. EFI printers use port 9102.
Ports to open on Passthrough printers
Port Source system Description 515 RICOH ProcessDirector primary server Required when receiving jobs from RICOH ProcessDirector using LPR. Ports to open on IPDS printers
Port Source system Description 5001-65535 RICOH ProcessDirector primary server Required when sending files to RICOH ProcessDirector using Download for z/OS or AFP Download Plus. These port numbers are configured when you create the input devices that receive these jobs. Open these ports after you define the input devices.
Ports to open on a transform server
Port Source system Description 6984-6992 RICOH ProcessDirector primary server Required if you use any of the RICOH Transforms and they are not installed on the primary server. These transforms are not the same as the RICOH ProcessDirector Advanced Transform feature. 16080 Administrator workstation Access to the Transform Features user interface if using any of the RICOH Transforms. Ports to open for the Reports feature
Port Source system Description 5432 RICOH ProcessDirector primary server and any system accessing RICOH ProcessDirector reports data Access to PostgreSQL database used to store data collected by the Reports feature. This database might be on the primary computer or on a different computer on your network. Required when using the RICOH ProcessDirector Reports feature.
Ports to open on a DB2 server
Port Source system Description DB2 prior to 11.5.8: 50000 DB2 11.5.8 and higher: 25000
RICOH ProcessDirector primary server Required when RICOH ProcessDirector uses a DB2 database installed on a different server. These are the default ports used by DB2; the default value changed in Version 11.5.8. If your installation of DB2 uses a different port, open the port you use.
Ports to open for a primary PostgreSQL database
Port Source system Description 5442 RICOH ProcessDirector primary server Used for communication with the Docker container that holds the PostgreSQL database for RICOH ProcessDirector - The language that RICOH ProcessDirector runs in depends on the browser that you use to access it. To change the language, you have to change the language of the operating system.