AIWPnnnn Messages
- AIWP0012I I:User {0} already exists in group {1}.
User response: Specify a different group and try the action again.
- AIWP0017I I:Printer {0} already exists.
User response: Specify a different printer name and try the action again.
- AIWP0057I I:An object that is named {0} already exists.
User response: Specify a different name and try the action again.
- AIWP0068I I:Printer {0} is already disabled.
User response: Refresh the web browser window.
- AIWP0069I I:Printer {0} is already enabled.
User response: Refresh the web browser window.
- AIWP3001W W:TotalFlow Production Manager cannot cancel these jobs: {0}.
User response: Refresh the web browser window.
- AIWP3003W W:TotalFlow Production Manager cannot delete these jobs: {0}.
User response: Refresh the web browser window.
- AIWP3007W W:TotalFlow Production Manager cannot delete {0}. It is in use by {1}.
User response: Delete all from {1} before deleting it from {0}. If the problem continues, report this error to software support.
- AIWP3010W W:Another object of the same type or a related type with the name {0} already exists.
Explanation: Two objects of the same type cannot have the same name; and an activity cannot have the same name as a workflow.
User response: Specify a different name and try the action again. If the problem continues, report this error to software support.
- AIWP3020W W:TotalFlow Production Manager did not update workflow {0} because of an active job count of {1}.
User response: Wait until TotalFlow Production Manager removes all the jobs that specify this job type and try again. If the problem continues, report this error to software support.
- AIWP3051W W:{1} property value: {2} of workflow {0} does not have read and write access to folder
{3}.
User response: Specify a different value for the property and try the action again.
- AIWP3061W W:TotalFlow Production Manager cannot delete {0}. It is protected.
User response: {0} cannot be deleted from TotalFlow Production Manager. Verify the user rights over {0}. Try the action again. If the problem continues, report this error to software support.
- AIWP3070W W:TotalFlow Production Manager did not establish an SNMP connection with the printer {0} because the printer is
unreachable.
User response: Make sure that the printer is visible in the network and working.
- AIWP3071W W:{0} : {1}.
System action: There is a warning on the printer that needs to be addressed. This message is not generated by TotalFlow Production Manager but received through SNMP from the printer device.
User response: Check the printer for warnings.
- AIWP6070E I:User {0} already exists.
User response: Specify a different user name and try the action again.
- AIWP6126E E:TotalFlow Production Manager cannot change the property value while a job is assigned to printer {0}.
User response: Clear all jobs from the printer. Then make the change to the property value again.
- AIWP6137E E:TotalFlow Production Manager cannot restart job {0} when the job is in an active state ({1}).
User response: Make sure that the job is inactive before you try to restart the job.
- AIWP6154E E:TotalFlow Production Manager cannot delete printer {0} while a job is active on the printer. Job {1}.
User response: Remove the active job from the printer and try to delete the printer again.
- AIWP6157E E:TotalFlow Production Manager cannot stop job {0} because it is in the {1} state.
User response: Use the override error action to move the job from the error state.
- AIWP6210E E:{0} : {1}.
System action: There is an error message on the printer which needs to be addressed. This message is not generated by TotalFlow Production Manager but received through SNMP from the printer device.
User response: Check the printer for errors.
- AIWP6219E E:Cannot delete paper {0}. The paper is used by printer {1}.
User response: Remove paper from the printer and try to delete again.
- AIWP6220E E:Cannot delete paper {0}. The paper is used by printer {1}.
User response: Remove paper from the printer and try to delete again.
- AIWP6224E E:Printer {0} must have output trays selected from {1}.
User response: Make sure that the selected output tray is ready on the printer.
- AIWP6225E E:Printer {0} must have {1} as supported paper.
User response: Add paper {1} as supported paper on printer {0}.
- AIWP6226E E:TotalFlow Production Manager cannot connect to the printer through SNMP.
User response: Check the printer IP address and network connection, then try again.
- AIWP6234E E:SNMP connection cannot be established after trying for several hours.
System action: Printer or network may be down.
User response: Check the IP address and network connection. Disable and enable SNMP from the printer property notebook to connect again.
- AIWP6250E E:Maximum number of allowed printers ({0}) exceeded.
User response: Remove one or several printers, then try again.
- AIWP6258E E:The paper change cannot have the same name as a printer: {0}.
User response: Enter a different name for the paper change, then try to create the paper change again.
- AIWP6260E E:The passwords do not match.
User response: Enter again your new password and the confirmation, and make sure that they are the same.
- AIWP6284E E:Printer Connector cannot properly connect to the requested IP address.
System action:TotalFlow Production Manager cannot connect to the printer through the network.
User response: Check the network status, verify that the printer is accessible through your network. If the problem continues, contact your network administrator.
- AIWP6290E E:Unable to delete paper: {0} paper is used by paper change {1}.
User response: Delete the paper change, then try to delete the paper again.
- AIWP6293I I:The workflow {0} was deleted.
User response: This is an informational message. No user response is required.
- AIWP6296E E:The Print Again action cannot be performed on job {0} because the job is processing.
User response: Wait for the job to complete processing and repeat the Print Again action.
- AIWP6297E E:The Delete action cannot be performed on job {0} because the job is printing.
User response: Wait for the job to complete printing and repeat the Delete action.
- AIWP6299W W:Hard disk space has fallen below the required level of {0}MB. As a precaution all
workflows have been disabled.
User response: Free at least {0}MB of disk space by deleting either unnecessary jobs from TotalFlow Production Manager or any unnecessary files from the operating system. Workflows can then be enabled again.
- AIWP6302E E:Cannot move job to printer {0} because it is in recovery mode.
User response: Move the job to another printer or fix the problems on the printer so the printer gets out of recovery, then move the job on the printer again.
- AIWP6303E E:Cannot delete printer because the following printers use this printer as backup printer:
{0}
User response: Unset the printer as backup for any other printer and try to delete it again.
- AIWP6307E E:Printer pool {0} cannot be created because a printer with the same name already exists.
User response: Specify a different name for the printer pool.
- AIWP6308E E:Printer {0} cannot be created because a printer pool with the same name already exists.
User response: Specify a different name for the printer.
- AIWP6309E E:Invalid SNMP parameters for printer: {0}: {1}.
User response: Verify SNMP parameters
- AIWP6311E E:Printer pool {0} cannot be deleted because it is used by one or more workflows.
User response: Assign the workflows to other printer pools or printers.
- AIWP6312E E:Printer pool {0} cannot be deleted because it is used by one or more jobs.
User response: Move the jobs to other printer pools or printers.
- AIWP6314E E:Printer pool {0} could not be created or updated because printer {1} does not exist
on the system and the printer pool depends on the printer.
User response: Make sure that you have all of the needed objects and try again.
- AIWP6315E E:Workflow {0} could not be created or updated because printer {1} does not exist on
the system and the workflow depends on it.
User response: Make sure that you have all of the needed objects and try again.
- AIWP6316E E:A paper with the descriptive name {0} already exists.
User response: Specify a different descriptive name for the paper.
- AIWP6321W W:TotalFlow Production Manager Printer Connector failed on SNMPv3 and has switch to SNMPv1.
User response: Check the SNMP settings on the printer.
- AIWP6323W W:Your trial license will expire in {0} days.
User response: The system will stop working if the license expires. To avoid any disruptions purchase and install a full license. Start the license application from the Windows Start menu on the system where TotalFlow Production Manager is installed, then follow the instructions in the license application help.
- AIWP6324W W:Your license has expired. Jobs will not process until a valid license is installed.
User response: Purchase and install a full license. Start the license application from the Windows Start menu on the system where TotalFlow Production Manager is installed, then follow the instructions in the license application help.
- AIWP6325E E:The operation is not available at this time for printer "{0}". Please make sure that
the printer's interface is up and is running.
User response: Check the printer JMF interface and make sure it is up and running. Also, check the printer’s network connectivity.
- AIWP6326E E:Notification {0} could not be created or updated because printer {1} does not exist
on the system and the notification depends on it.
User response: Make sure that you have all of the needed objects and try again.
- AIWP6327E E:Notification {0} could not be created or updated because printer {1} does not exist
on the system and the notification depends on it.
User response: Make sure that you have all of the needed objects and try again.
- AIWP6332E E:Job {0} is in error state because child job {1} is in error state.
User response: Try to fix the error with the child job or contact software support.
- AIWP6329I I:Printer pool {0} created {1} child jobs from job {2}.
User response: This is an informational message. No user response is required.
- AIWP6330I I:Printer pool {0} moved job {1} to printer {2}.
User response: This is an informational message. No user response is required.
- AIWP6331I I:Printer pool {0} created job {1} as a child of job {2}, with the number of copies
set to {3}.
User response: This is an informational message. No user response is required.
- AIWP6328E E:The content of imported resource is invalid because the following error occurred:
{0}
User response: Make sure that the content of the import file is valid. Export the resources again, then try to import them one more time.
- AIWP6335W W:The selected page range is out of the page range for job {0}.
User response: Select a correct page range and try the action again.