Specifying Tab Size

Specify tab height, length, and distance from the sheet edge.
Tab size specification.

There are four settings for tab size:

  1. Tab edge to sheet edge: Specify the distance from the sheet edge to the top and bottom edges of the tab bank. Use increments of 0.1 mm (0.01 inches).

  2. Short edge: Specify the length of the tab’s short edge. This is the side of the tab farthest from the sheet. Use increments of 0.1 mm (0.01 inches).

  3. Long edge: Specify the length of the tab’s long edge. This is the side of the tab that joins the sheet. Use increments of 0.1 mm (0.01 inches).

  4. Height: Specify the height of the tab. This is the distance from the tab’s short edge to the sheet edge. Use increments of 0.1 mm (0.01 inches).

Parent topic: Editing Tabs