Placing an Original or Color Chart on the Paper Tray

    Important:
  • Do not add an original in the tray while some sheets are still remaining on the tray. Doing so might cause double feeding to occur.
  • Faint streaks or linear imprints might appear on the surface of the paper when you use an original or color chart that is printed on coated paper or media that is easily scratched.
  • When loading multiple sheets of paper together, fan the sheets thoroughly, bend and then align the edges slowly several times while holding both edges. If misfeed occurs, place one sheet at a time.
Fanning the sheets Bending the stack

To place an original or color chart on the paper tray:

  1. Open the paper tray.Opening the paper tray
  2. Pull out the extension tray when you are placing an original that extends beyond the edge of the tray (longer than A4 size paper in portrait orientation).Pulling out the extension tray
  3. Gently insert the paper with the side to be scanned facing up.Placing paper on the paper tray
      Note:
    • Place an original so that it is not stacked above Upper limit indicator, the upper limit indicator. If you place an original beyond the upper limit indicator, it might be scanned at an angle or cause a paper jam.
  4. Adjust the paper guide to fit the paper size.Adjusting the paper guide to fit the paper size
Parent topic: Using an Original or Color Chart