|Length Unit||Select mm or inch for the unit to specify the paper length along the sub scan direction of an original/chart.
If you change the unit setting from inch to mm, the setting values in Quick Color Adjustment and Color Sample Matching are rounded off at the second decimal place.
|Quick Color Adjustment||In Quick Color Adjustment, specify the paper size of the chart to be scanned. Enter the paper length along
the sub scan direction in the range between 210 and 487.7 mm (8.3 and 19.2 inches).
Default: Custom Size 420 mm
|Color Sample Matching||In Color Sample Matching, specify the standard size for the document to be scanned. Select the paper size,
or enter the paper length along the sub scan direction in the range between 210 and
487.7 mm (8.3 and 19.2 inches).
This can be changed for each document to be scanned in the Color Sample Matching screen.
Default: A3 - Short Edge Feed
|M Factor (Start Color Optimization)||Select the lighting conditions when scanning a chart using Quick Color Adjustment.
Select M0 when using JC Digital 2011 Coated, Wedge as the color verification standard. Specify M1 when using ISO12647-8 Coated V3 F51, Verify GRACoL2013, Wedge, Simple Gray Scale, Wedge 2013, or ISO12647-8 Coated V3 F51.
Color Sample Matching operates according to M2 regardless of this setting.