デーモン構成ファイル
PCL、PostScript、および PDF のすべての変換で、その変換を使用する前にデーモンを実行しておく必要があります。pcl2afpdデーモンは、pcl2afp変換のPostScriptインタープリター部分を管理するために少なくとも3つのデーモンが実行していることが必要です。ps2afpdデーモンは、ps2afpとpdf2afpの変換のPostScriptまたはPDF CPSIインタープリター部分を管理します。appedデーモンは、ps2afpとpdf2afpの変換のPDF APPE処理部分を管理します。agspdld デーモンは、ps2afp と pdf2afp の変換の PDF および PostScript Artifex GhostPDL (AGSPDL) 処理部分を管理します。このデーモンについては、RICOH InfoPrint Manager：Referenceを参照してください。
各デーモンは、対応する変換と同様に、構成ファイルを使用します。デーモン構成ファイルは、変換構成ファイルと同じキーワード（serverを除く）と、デーモンの操作を制御する一部のキーワードを含めることができます。デーモンのキーワードについては、RICOH InfoPrint Manager：Referenceを参照してください。
サンプルAGSPDLデーモン構成ファイル (agspdld.cfg)
# agspdld configuration file
######################################################################
# KEYWORD PURPOSE
######################################################################
port = 8254 # which TCP/IP port to use
work_directory = /var/psf/agspdl
# directory to put work files into
log_file = /var/psf/agspdl/agspdl.log
# where to write log messages
log_size = 1024 # maximum log size in KB
ps_font_directory = /var/psf/agspdl/Resource
# list of resource files
ps_output_type = IO1_G4 # type of AFP image to generate
ps_width = 8.5i # width of generated image
ps_length = 11i # length of generated image
ps_resolution = 300 # resolution of target printer
agspdl_is = 1 # the is afp compliance flag
#agspdl_compress_type = lzw
# lzw compression
# other options: jpeg, jpeg-sub
#agspdl_page_size_control
# -psc page size control options
# ArtBox, BleedBox, CropBox, TrimBox
サンプルAPPEデーモン構成ファイル (apped.cfg)
# apped configuration file
######################################################################
# KEYWORD PURPOSE
######################################################################
port = 8250 # which TCP/IP port to use
appe_work_directory = /var/psf/appe
# directory to put APPE work files into
log_file = /var/psf/appe/apped.log
# where to write daemon log messages
log_size = 100 # maximum log size in KB
#transform_trace_file = /var/psf/appe/appeTraceFile.log
# where to write APPE transform traces
# comment out to disable tracing
#transform_trace_size = 200 # maximum trace size in KB
# use 0 to disable trace size checking
#transform_trace_level = MDFL@-1
# APPE traces level
# MMST@-1 output most trace statements
# MINT@-1 output intermediate level of tracing
# MDFL@-1 output default trace statements
#appe_fonts_path =
#list of directories where extra APPE fonts are located
appe_font_map_files = /usr/lpp/psf/appe/fontmaps/FontMapSample.cfg
appe_width = 8.5i # width of generated image
appe_length = 11i # length of generated image
appe_x_offset = 0i # left and right margins
appe_y_offset = 0i # top and bottom margins
appe_resolution = 300 # resolution of target printer
appe_output_type = IO1_G4 # type of AFP image to generate
#appe_is = 1 # the is afp compliance flag
#appe_compress_type = jpeg-sub
# JPEG subsampled compression. Other options: jpeg, lzw
#appe_pagetype = DOCUMENT
# type of afp structured field for each individual page
サンプルpcl2afpデーモン構成ファイル (pcl2afpd.cfg)
# pcl2afpd configuration file
######################################################################
# KEYWORD PURPOSE
######################################################################
port = 8253 # which TCP/IP port to use
work_directory = /var/psf/pcl2afp
# directory to put work files into
log_file = /var/psf/pcl2afp/pcl2afpd.log
# where to write log messages
log_size = 100 # maximum log size in KB
notify = root # who to notify if problems encountered
mail_command = /bin/mail
# program used to send notifications
pcl_program = /usr/lpp/psf/bin/pcl6
# name of PCL interpreter program
pcl_fonts_path = /usr/lpp/psf/pcl2afp
# location of .FCO files for PCL6
pcl_max_memory = 6000K # maximum amount of memory that
# PCL uses; the 'K' is ignored
pcl_job_timeout = 20 # maximum number of minutes
# to process a PCL job
pcl_width = 8.5i # width of generated image
pcl_length = 11i # length of generated image
pcl_x_offset = 0i # left and right margins
pcl_y_offset = 0i # top and bottom margins
pcl_resolution = 300 # resolution of target printer
pcl_output_type = IO1_G4 # type of AFP image to generate
#pcl_is = 1 # the is afp compliance flag
#pcl_compress_type = lzw # lzw compression
# other options: jpeg, jpeg-sub
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.
######################################################################
# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and
# double-sided (duplexed) output, uncomment the following line.
# device_controls = plex
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper
# tray to use, uncomment the line below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the PCL bin number (between 1 and 59).
# You can list up to 20 mappings.
# device_controls = plex,inputX=(pcl_bin=Z),inputX=(pcl_bin=Z)
InfoPrint 4000とInfoPrint 4100プリンター向けサンプルps2afpデーモン構成ファイル (ps2afpd.cfg)
# ps2afpd configuration file
######################################################################
# KEYWORD PURPOSE
######################################################################
port = 8251 # which TCP/IP port to use
work_directory = /var/psf/ps2afp
# directory to put work files into
log_file = /var/psf/ps2afp/ps2afpd.log
# where to write log messages
log_size = 100 # maximum log size in KB
notify = root # who to notify if problems encountered
mail_command = /bin/mail
# program used to send notifications
ps_program = /usr/lpp/psf/bin/ps2afpi
# name of PostScript interpreter program
ps_init_file = /usr/lpp/psf/ps2afp/ps2afpe.ps
# name of PostScript interpreter
# initialization file
ps_files_path = /usr/lpp/psf/ps2afp :\
/usr/lpp/psf/config :\
/usr/lpp/psf/reslib
# path to search for jobInit files
ps_max_memory = 48000K # maximum amount of memory that
# PostScript uses; the 'K' is ignored
ps_job_timeout = 9999 # maximum number of minutes
# to process PostScript job
ps_server_timeout = 360 # maximum number of minutes
# server waits between jobs
ps_font_map_files = /usr/lpp/psf/ps/psfonts.map :\
/var/psf/psfonts/user.map
# list of font mapping files
ps_width = 8.5i # width of generated image
ps_length = 11i # length of generated image
ps_x_offset = 0i # left and right margins
ps_y_offset = 0i # top and bottom margins
ps_resolution = 300 # resolution of target printer
ps_output_type = IO1_G4 # type of AFP image to generate
#following three parameters will apply only if threshsmall specified
ps_imgsmall = 0.5i # default value for imgsmall
ps_linesmall = 0.5i # default value for linesmall
ps_txtsmall = 0.5i # default value for txtsmall
#ps_is = 1 # the is afp compliance flag
ps_compress_type = jpeg-sub # JPEG subsampled compression. \
Other options: jpeg, lzw
######################################################################
# Customize if desired
#pragma = jobInit 4000.ibm85lpi.tf.dt.ps; \
# jobInit 4000.ibm85lpi.ta.ps;
#
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.
######################################################################
# ENABLING THE FINISHING FLAG ONLY
# If you want your users to be able to allow finishing operations,
# such as staple operations or punch operations, uncomment the
# following line.
# device_controls = finishing
######################################################################
# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and
# double-sided (duplexed) output, uncomment the following line.
# device_controls = plex
######################################################################
# ENABLING BOTH PLEX AND FINISHING
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND allow finishing
# operations, such as staple operations or punch operations,
# uncomment the following line.
# device_controls = plex,finishing
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper
# tray to use, uncomment the line below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)
# device_controls = plex,inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output, AND allow finishing
# operations, AND specify which paper tray to use, uncomment the line
# below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)
# device_controls = plex,finishing,inputX=(size,type=ZZZ,weight=ZZZ, \
color=ZZZ), inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)
カットシートIPDSプリンター向けサンプルps2afpデーモン構成ファイル (3160d.cfg)
# ps2afpd configuration file
######################################################################
# KEYWORD PURPOSE
######################################################################
port = 8252 # which TCP/IP port to use
work_directory = /var/psf/ps2afp2
# directory to put work files into
log_file = /var/psf/ps2afp2/ps2afpd.log
# where to write log messages
log_size = 100 # maximum log size in KB
notify = root # who to notify if problems encountered
mail_command = /bin/mail
# program used to send notifications
ps_program = /usr/lpp/psf/bin/ps2afpi
# name of PostScript interpreter program
ps_init_file = /usr/lpp/psf/ps2afp/ps2afpe.ps
# name of PostScript interpreter
# initialization file
ps_files_path = /usr/lpp/psf/ps2afp :\
/usr/lpp/psf/config :\
/usr/lpp/psf/reslib
# path to search for jobInit files
ps_max_memory = 48000K # maximum amount of memory that
# PostScript uses; the 'K' is ignored
ps_job_timeout = 9999 # maximum number of minutes
# to process PostScript job
ps_server_timeout = 360 # maximum number of minutes
# server waits between jobs
ps_font_map_files = /usr/lpp/psf/ps/psfonts.map :\
/var/psf/psfonts/user.map
# list of font mapping files
ps_width = 8.5i # width of generated image
ps_length = 11i # length of generated image
ps_x_offset = 0i # left and right margins
ps_y_offset = 0i # top and bottom margins
ps_resolution = 300 # resolution of target printer
ps_output_type = IO1_G4 # type of AFP image to generate
ps_compress_type = jpeg-sub # JPEG subsampled compression.\
Other options: jpeg, lzw
pragma = jobInit 3160.ibm85lpi.tf.dt.ps; \
jobInit 3160.ibm85lpi.ta.ps; \
wglRotate yes;
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# NOTE: Uncomment only one of the options below.
######################################################################
# ENABLING THE PLEX COMMAND ONLY
# If you want your users to be able to choose between single-sided and
# double-sided (duplexed) output, uncomment the following line.
# device_controls = plex
######################################################################
# ENABLING THE PLEX COMMAND AND MAPPING BINS TO TRAYS
# If you want your users to be able to both choose between single-
# sided and double-sided (duplexed) output AND specify which paper
# tray to use, uncomment the line below and fill in the correct values:
# Replace the Xs with the number of the AFP tray (between 1 and 255).
# Replace the Zs with the appropriate values.
# Replace size with one of the supported paper sizes \
(LETTER, LEGAL, A3, A4, B4, B5, LEDGER)
# device_controls = plex,inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ), \
inputX=(size,type=ZZZ,weight=ZZZ,color=ZZZ)