Creating actual destinations with the InfoPrint Manager Administration GUI

The InfoPrint Manager Administration GUI provides wizard support for creating these types of actual destinations:

When you use the wizard to create any of the PSF printers (PSF TCP/IP, PSF Command, or PSF Other), the wizard sets default values for some of the attributes of the printer. The attributes and their associated default values are listed below.

media-supported
Only set when the printer is not an SNMP printer. Default values vary depending on the printer model you select.

Default printer values using the wizard

Printer Values

InfoPrint 45, InfoPrint 70

  • 8.5 x 12.4 inch
  • 9 x 11 inch
  • 12 x 18 inch
  • A3 (297 x 419 mm)
  • A4 (210 x 297 mm)
  • A5 (148 x 210 mm)
  • executive (7.25 x 10.5 inch)
  • folio (8.5 x 13 inch)
  • jis-b4-white (257 x 364 mm)
  • jis-b5-white (182 x 257 mm)
  • ledger (11 x 17 inch)
  • legal (8.5 x 14 inch)
  • letter (8.5 x 11 inch)
  • statement (5.5 x 8.5 inch)
All other printer models
  • A3 (297 x 419 mm)
  • A4 (8.27 x 11.69 inch)
  • jis-b4-white (257 x 364 mm)
  • jis-b5-white (182 x 257 mm)
  • ledger (11 x 17 inch)
  • legal (8.5 x 14 inch)
  • letter (8.5 x 11 inch)
  • tabloid (11 x 17 inch)
sides-supported
Only set when the printer is not an SNMP printer. Set to 1 and 2.
plexes-supported
Only set when the printer is not an SNMP printer. Set to simplex and tumble.
printer-resolutions-supported
Set to 240, 300, 480, and 600.

If you are running with the Basic InfoPrint Manager GUI, InfoPrint Manager sets the defaults shown in Basic InfoPrint Manager Administration GUI defaults for PSF printers.

Basic InfoPrint Manager Administration GUI defaults for PSF printers