Configuring InfoPrint Manager to use the InfoPrint 4000 and 4100

Perform this procedure with the help of your InfoPrint service representative to make sure that the actual destination, the InfoPrint 4000 or InfoPrint 4100 printer, and the cutter-trimmer-stacker (CTS) (a post-processing device used for paper handling) all support the same media types.
  1. Use the procedure in "Associating a medium with an actual destination" from the InfoPrint Manager for AIX: Procedures to specify the media that the actual destination representing the InfoPrint 4000 or 4100 supports.
  2. On the printer, define forms that correspond to the media you specified in step 1, for example:
    Medium Object Name Printer_Form Name Printing_Form Description
    letter na letter 2-Up letter (8.5 by 11)
    legal na legal 2-Up legal (8.5 by 14)
    ledger ledger 1-Up (11 by 17)
  3. Set up the CTS for the dimensions required by the supported media. For example, to support ledger-size paper, set up the CTS for an 11-inch cut width and a 14-inch cut length. CTS can support a limited set of cut lengths and only one center slitting option.